60CM GAS COOKTOP SC-610AUGCT INSTRUCTION MANUAL Please read this manual carefully before using, and keep it for future reference.
CONTENTS General Safety 4 Product Overview 7 Installation 8 Ventilattion Requirements 9 Cooktop Preperation 11 Installing Cooktop Guide 12 Applying Seal 13 Installing and Mounting Cooktop 13 Gas Connection 14 Electrical Conncetion 15 Instructions 16 Other Useful Information 17 FAQs 20 Specifications 21 Customer Helpline 24
GENERAL SAFETY IMPORTANT INFORMATION Read this manual thoroughly before you start using the Gas Cooktop. The safety precautions instructions reduces the risk of fire, electric shock and injury when correctly complied to. Please follow all instructions and take notice of all warnings. WARNING! • INSTALLATION: This Gas Cooktop must be installed by a licenced gasfitter in accordance with this manuals instructions, rules and regulations. Any eletrical work required must be done so by a qualified electrician.
GENERAL SAFETY INSTRUCTIONS (Cont.) USAGE CONDITIONS AND RESTRICTIONS • Supervision over children is to ensure that they do not play with the appliance. Never allow them to use, play with or crawl inside the appliance. Cleaning and maintenance must not be done by children.
GENERAL SAFETY INSTRUCTIONS (Cont.) • Do not use any unstable or plastic cookware products or aluminium foil containers. No large cookware are to overlap bench as this can deflect heat back onto the cooktop and damage the surface. Cookware products can become hot while in use with this appliance. Be sure to position handles away from reach of children. • Dont ever cover the cooktop or place combustable materials in any way near the surface even when the hob is not in use.
PRODUCT OVERVIEW A 2 x Semi rapid gas burner B Control Panel C Rear Right Burner Control D Rear Left Burner Control E Front Left Burner Control F Front Right Burner Control G Auxiliary Gas Burner H 2 x Trivets (Pan Supports) I Rapid Gas Burner 7
INSTALLATION Before installing your appliance, read all safety instructions in this manual, especially the sections on electrical safety and installation. UNPACKING • When unpacking the appliance, be sure to keep all the packaging materials until you have made sure your new appliance is undamaged and in good working order. This product has been packaging to protect itself against transportation. • Be sure to remove all packaging materials around the appliance and that the plastic film used is also removed.
INSTALLATION (Cont.) IMPORTANT ADVICE • The appliance must only ever be located and installed in a kitchen and not any other room. • This cooktop is not suitable for mobile homes, caravans and marine craft unless every burner is fitted with a flame safeguard. • Where you want to place the Gas Cooktop, the wall and bench around the appliance must be able to sustain temperatures of 95˚C. Laminates, surface materials and fixing adhesives must be certified that it can sustain the tempertures.
INSTALLATION (Cont.) MINIMUM CLEARANCES Walls or vertical structures must be at least 200mm away from the burner. Where the horizontal clearance is less than 200mm, that vertical surface must be protected by a non-combustible material for 150mm above the cooktop surface across the entire length (depth, width). The 150mm protected surface may be ceramic tiles or another approved non-combustible material. The combustable surface within the clearance zone may be protected by one of the following methods. a.
INSTALLATION (Cont.) COOKTOP PREPERATION • Make sure there is plenty of ventilation and control elements are easily accessible. • The cooktop can be fitted to benchtops of 40-50mm • For rangehood isntallation above the appliance, check the rangehood instructions for required clearences before installation of the product.
INSTALLATION (Cont.) INSTALLING COOKTOP IN YOUR BENCH • Measurements for fitting and cutout of the appliance are as below. 5 6 2 3 4 1 1. 2. 3. 4. 12 553 mm 473 mm 150 mm 150 mm 5. 6.
INSTALLATION (Cont.) APPLYING SEAL The Gas Cooktop has a special seal which prevents liquid from infiltrating into the cabinet. Be sure to strictly follow these instructions in order to correctly apply this sealing tape before inserting the Gas Cooktop into the benchtop. • Remove all trivets and burner caps then turn the Gas Cooktop upside down, make sure you carefully place it upside down to not damage the ignition plugs and the thermocouples. • Remove the backstrip of the sealing tape.
INSTALLATION (Cont.) GAS CONNECTION • Make sure that it is possible to run gas lines to the gas connection point of the appliance. The gas connection point must be accessible without having to remove the cooktop. If a flexible hose is used, the connection point must also be accessible without having to remove the cooktop.
INSTALLATION (Cont.) ELECTRICAL CONNECTION • Insert the powerplug firmly into an appropriate power outlet and switch it on. • The power outlet must be correctly earthed and easily accessible. The outlet voltage and frequency must cirrespond to the voltage indicated on the appliance taing label.
INSTRUCTIONS BEFORE USING THE GAS COOKTOP • Before first time use of the Gas Cooktop and that it has been professionally installed. Please read through this manual especially the safety instructions at the beginning of the manual. • Make sure Cooktop is correctly plugged into the wall outlet and power is switched on.
INSTRUCTIONS (Cont.) FLAME FAILURE SAFETY • This Gas Cooktop has a flame failure safety feature which quickly cuts off the gas supply to the burner in the event of the flame going out.
OTHER USEFUL INFORMATION CLEANING AND MAINTENANCE CAUTION! • Before cleaning any part of the Cooktop, be sure to have all controls are switched off and the oven has called down sufficiently. • Make sure once all burners are switched off that the cooktop surface is cool before you commence cleaning. • Do not use harsh cleaning products such as scouring powders, wire brushes or sharp objects that can damage and scratch the cooktop surface.
OTHER USEFUL INFORMATION ALUMINIUM PARTS • Clean the burner parts once a month to ensure nothing is clogging the mechanism. Use a thin steel needle to remove any dirt, combustion residues or spilled food residues from the burner holes. • Remove the burner bodies from the cooktop and clean them the same way as the enamelled parts, or use a nylon brush to remove any cleaning materials, water or dirt. • After cleaning, rinse and dry thoroughly.
FAQS If experiencing issues with your oven and isn’t operating correctly please check the following pages for solutions to the problems. If none of the solutions offered help solve the problem with your appliance then please contact our call centre on 1300 296 699. DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF. Problem Solution The burner has more yellow flame then blue. • Switch off the burner and check: - All parts of the burner are clean and dry.
SPECIFICATIONS Model Number SC-610AUGCT Power Supply 220-240VAC 50Hz 1-2W Certified Gas Type Natural Gas / LPG Total Gas Consumption 27.9 MJ/h Rapid Gas Burner NG: 11.2 MJ/h / LPG: 10.1 MJ/h 2 x Semi Rapid Gas Burner NG: 6.4 MJ/h / LPG: 7.0 MJ/h Auxiliary Gas Burner NG: 3.9 MJ/h / LPG: 4.1 MJ/h Gas Regulator Test Point Pressure 1 KPa Cooktop Dimensions 580 (w) x 500 (d) x 85(h) mm Benchtop Cutout 553 (w) x 473 (d) mm Flame Failure Safety Yes Weight Net: 6 kg / Gross: 8.
CUSTOMER HELPLINE: info@ayonz.