User Manual

14
TOP MOUNTING IN A CABINET
• Determine where in the top cabinet you want to install the rangehood, then
drill 4 holes of Ø4mm at the bottom of the hanging board of your cabinet.
• You will also need to make an opening for the power cord and plug and, if
the rangehood is to be ducted to the outside, a hole for the ducting.
• Install the rangehood onto the bottom of the cupboard and secure it in
place with four M4x30mm screws.
WARNING: Failure to install the screws or fixing device in accordance with
these instructions may result in electrical hazards!
INSTALLATION (Cont.)