User's Manual

30
Press▼/▲ button to select No Signal Power Off, then press OK button to select it On or Off.
When set it On and there is no signal input by 10 minutes, it will turns off the panel and the LED light
turns amber.
Attention!
If [ All Reset ] was executed
TV system is reset.
Press ▼/▲ button to select No Operation Power Off, then press OK button to select it On or Off.
When set it On and there is no operation input by 3 hours, it will turns off the panel and the LED
light turns red.
Press ▼/▲ button to select All Reset, then press OK button to execute reset. When you select
All Reset item, a dialogue box will appear as following:
All Reset
No Operation Power Off
No Signal Power Off
English
MENU OPERATION
AV/YPbPr1/YPbPr2/HDMI1/HDMI2
1.PICTURE menu and description are the same as that for TV source.
2.SOUND menu and description are the same as that for TV.
But the settings for Analog Sound and Digital Sound are invalid
in these sources.
3.PARENTAL menu and description are the same as that for TV V source.
4.SETUP menu and description are the same as that for TV source.
But the setting for Closed Caption is invalid in source HDMI.
5.OTHER menu and description are the same as that for TV source.
6.CHANNEL menu and description are invalid in these sources .
PICTURE MENU
MENU
Color Temperature Normal
Advanced Picture Settings
Picture Settings
Screen Settings
PC Settings
PICTURE
ENTER
:Return
:Select Menu
:Go to Next Menu