Important Safety Instructions • Read these instructions – All the safety and operating instructions should be read before this product is operated. • Keep these instructions – The safety and operating instructions should be retained for future reference. • Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. • Follow all instructions – All operating and use instructions should be followed.
Contents Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 What’s Included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Caution The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons.
Safety Information To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below. Electrical safety • • • • • • • • • • • The TV set should only be connected to a main power supply with voltage that matches the label at the rear of the product. To prevent overload, do not share the same power supply socket with too many other electronic components.
What’s Included Unit and Accessories Remote control with batteries TV Set Power cord User’s Manual warranty card 5 AV cable
10 11 1. AC power input terminal 2. USB port 3. HDMI 1/HDMI2/HDMI3 input. 4. VGA input. 5. S-VIDEO input. 6. Coaxial audio signal out plug. 7. Component input terminal. 8. AV1/AV2 input. 9. PC audio input. 10. Headphone output. 11. Antenna input (75 Ohm VHF/UHF).
Connecting to external devices Connecting external devices to your LCD TV 8
Remote Control Key Functions Power button Picture mode button Sound mode button Sleep button MTS button Numeric buttons Return channel button Channel setup TV setup menu OK button Signal source selection button UP RIGHT LEFT Down Exit the OSD menu button Mute button Channel selection button Information button Volume adjust button Aspect button ADD / Erase button FAV button Time button EPG button CC button V-CHIP button MMP Menu button Auto button Blue button Yellow button Stop button Play / Pau
Remote Control Key Functions (TV/AV1/AV2/S-VIDEO/YPBPR1/YPBPR2/VGA/HDMI1/HDMI2/HDMI3/USB) 10
Operating Your Television Menu Setup TV(When Using For The First Time Only) 1. Turn on TV, Please press OK to start the wizard. 2.Please select your language. 3.Please select your time zone. 4.Please select your tuner. 5.Connect antenna and Press OK button start channel scan.
Operating Your Television Basic Operations Turning Your TV On and Off TURN ON LCD TV 1. Connect to power with the main power cable, at this time the TV will enter STANDBY mode and the LED will be red. 2. From the STANDBY mode, use the POWER button either on the main unit or on the remote to turn your television on. TURN OFF LCD TV From ON mode, use the POWER button either on the main unit or on the remote to turn your television to STANDBY mode.
Operating Your Television Navigating the Onscreen Display • Press the MENU button to display the main menu. • Use / buttons to navigate and select the available menus. Advanced Video OK OK Time Display Mode 12Hour OK OK Choosing a TV Channel 1. Use the CH /CH on the front panel or on the remote control. • Press CH to increase the channel. • Press CH to decrease the channel. 2. Using 0-9 remote keys. Enter the channel number with the 0-9 remote keys, then press “OK” to select the channel.
Operating Your Television Selecting Input Source TV AV1 AV2 S-VIDEO YPBPR1 YPBPR2 VGA HDMI1 HDMI2 HDMI3 USB You can display the input screen menu by pressing SOURCE on the remote control or SOURCE on the front panel, press / button to select, press “OK” to confirm. Video Menu Options Press the MENU on the front panel or MENU on the remote control and then use menu, press or OK to enter (see picture below). Advanced Video / to select the Video 1.
Operating Your Television Audio Menu Options Press MENU on the front panel or MENU on the remote control and then use menu, press or OK to enter (see picture below). 75 80 / to select the AUDIO 1. Use / to select the option you want to adjust in the Audio menu. 2. Press OK or / to adjust (according to the hints below) 3. When you are satisfied with your adjustment, press MENU to exit.
Operating Your Television Channel Skip Select “Channel Skip”; press OK to enter the submenu. Press / to select the desired channel, then press OK. OK Setup Menu Options Press the MENU on the front panel or MENU on the remote control and then use menu, press or OK to enter (see picture below). / to select the Setup 1. Use / to select the option you want to adjust in the setup menu. 2. Press OK or / to adjust (according to the hint below). 3. When you are done with your adjustments, press MENU to exit.
Operating Your Television Caption Select “Caption”, press OK to enter the submenu (see below) Analog Closed Caption Press / to select CC1/CC2/CC3/CC4/TEXT1/TEXT2/TEXT3/TEXT4, or select Off. Digital Closed Caption Press / to select Service1/Service2/Service3/Service4/Service5/Service6, or select Off. Digital Caption Style This item allows you to set the closed caption, press OK to enter Digital Caption style menu: OK • Caption Style: press / to select As Broadcaster or Custom.
Operating Your Television PC Mode Connect your computer to the TV using a VGA cable. Change the source to VGA, then press “MENU” and select “VGA” Press OK to enter PC setup Auto adjust your picture to best position H. position: Manually control horizontal position V.
Parental Menu Options Parental Menu Options Press the MENU on the front panel or remote control and then use Press or OK to enter (see picture below). / to select the Parental menu, The factory default password code is 0000 to enter the parental menu. Change Password: select “Change Password”, press OK to enter the submenu, and change the password. Press MENU to cancel. Clean All: Select “Clean All”, Press OK and it will display “Are you sure”, select “OK” to default to the factory settings.
Parental Menu Options Parental Control Press Enter to enter the sub-menu and then use the 0-9 to enter the correct password: 0,0,0,0. If used, this option feature can “block” undesirable programming from appearing on the TV. Parental Control offers the user a wide variety of options and settings that restrict or “block” the programming that can appear on the TV. Parental Control allows the user the capability of defining which program rating they consider acceptable, to the younger more sensitive viewer.
USB multimedia operation OK duration.
Troubleshooting If your television does not operate normally or does not turn on, please check the following troubleshooting questions. Remember to also check the other connected electronic devices, such as DVDs or Blu-ray players to pinpoint any problem. If the television still fails to operate normally, please contact technical support (refer to Warranty page). SYMPTOM POSSIBLE CAUSE REMEDY Dead. No LED lit No power to the TV. Check all connections to the TV’s AC socket. Dead.
Troubleshooting Before contacting the service technician, perform the following simple checks. If any problem still persists, unplug the LCD TV and call for assistance. PROBLEM POSSIBLE SOLUTION No sound and picture - Check that the main plug has been connected to a wall outlet - Check that you have pressed the POWER button on the front of the TV set - Check the picture contrast and the brightness setting Red LED indicator light Set in standby mode.
Troubleshooting NOTE: When there is a problem in VGA mode (only when VGA mode is applied) PROBLEM POSSIBLE SOLUTION The signal is out of range - Adjust resolution, horizontal frequency, or vertical frequency - Check whether the signal cable is connected or loose - Check the input source Vertical bar or stripe on background, horizontal noise and Set the auto configure or adjust clock, phase or H/V incorrect position position Screen Color is unstable or is a single Color - Check the signal cable - Re-ins
The FCC Wants You To Know This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications.
