User's Manual

Fig 3 mute function on
Fig 2 mute function off
This key activates several functions:
Press this key slightly once and you will get into the MANUAL SELECT for
the 144 frequencies. When the GROUP indicator is flashing, you can press
the UP/DOWN keys to select manually the desired Group. Then you can press
the MEM key to store this setting.
Press the MENU key twice and the CHANNEL indicator will flash. Use the UP/DOWN
keys to selected the desired channel and then press MEM key to store this setting.
Press the MENU key three times and you can adjust the OUTPUT LEVEL. Using
the UP/DOWN keys you have the choice to select three different levels:
PL 0 indicates that the output level is 1.1V
PL 1 indicates that the output level is 575mV
PL 2 indicates that the output level is 250mV
: This function is only available when using the XLR balanced output.
Press the MENU key four times and you will get into the MUTE function. Use the
UP/DOWN keys to mute/unmute the Unit.
Press the MENU key five times and you will activate the SQUELCH function. To
squelch or not to squelch, this is the issue...
Squelch is a complicated name to express a simple conce pt: The threshold above
or below that a signal is made pass through the receiver or not.
Fig 1
During this process, the audio output will be muted and the display will show
you the Group Number scanned, the channel number scanned and the
frequency that is being scanned. Once the transmitter frequency has been
found, the display will flash and the RF bar indicator and Battery life icon will
appear. Press MEM again slightly and such frequency will be stored into your
MOD-800R Receiver. Please note that frequencies can be scanned manually
using the UP/DOWN key. See the Annex for more details.
AF
RF
MHz
AF
RF
MHz
AF
RF
MHz
3. CONTROL ELEMENTS
4. OPERATION
You don't want accidental change of frequency or other setting in the middle of a
performance, do you? Any miss-operation during a live performance can be easily
avoided thanks to the LOCK function. With the LOCK function ON no further change
of setting is allowed until the Transmitter is unlocked. To access the LOCK Menu,
press the CH/ON key four times and then press the SELECT key to lock or unlock
the Transmitter Settings. Your choice of setting will automatically be saved into the
Transmitter in a few seconds. The blue display shows "lock" and "unlock" depending
on the operating mode.
Fig 10: LOCK Fig 11: UNLOCK
Sometimes, there are things that you want to te ll to your Friends on stage or
your nearby Companion during a Meeting but not necessarily to the rest of the
world especially if you are ON LIVE on CNN... A smart feature on your Transmitter
allows you to easily MUTE the microphone so you are free to talk to the people
next to you without the rest of the world hearing what you say . To enter into
MUTE function simply press the SELECT key for a few seconds and the Transmitter
will mute any audio signal going to the Receiver. Press SELECT again for a few
seconds and you will UNMUTE the Transmitter.
3. CONTROL ELEMENTS
4. OPERATION