User's Manual Part 3

Connect the optional recharger(see fig) with this mini jack for battery recharging.
Please make sure that it has rechargeable batteries inside before plugging in the
recharger with the mini charge jack.
Charge Jack
6
The antenna is integrated into the transmitter body; to get effective RF transmission, never cover the antenna
with hand, etc.
Antenna
7
3.3 TMW-9144P series, Body Pack Transmitter
CH/ON Key
Keep pressing this key for a few seconds, the unit will be powered on or off. After it is switched on, touch this
key slightly to select the parameter which you want to edit, such as the preset channel, preset group, PL(RF
power level) and Lock/unlock. In this mode, if there is no further operation in the next few seconds, it will
return to the main menu, and the LCD displays again the current preset frequency in MHz, as well as the
battery status.
SELECT Key
Use this key to edit the parameters in operation mode. Keep pressing this key for a few seconds, the unit will
enter into the mute mode, repeat for unmute.
2
3
1
LCD Display
Generally, the LCD displays the current operation status.
4
Mini 4P connector
This connector is used to connect the unit with the clip microphones,
for example, HM-38 or HM-58 condenser microphones.
The unit may be powered from a dry or rechargeable battery.
Battery Compartment
5
Pin 2, GND
Pin 4, for Dynamic or condenser microphone
7
ENGLISH
Pin 3, Phantom power supply for Condenser microphone
Pin 1, for Guitar, bass and keyboards
10