Manual

Personnel
Only specialists are allowed to work on the unit. Unauthorized personnel must be prohibited from
working on the unit.
Operating personnel must inform their superiors imme
the unit becomes apparent.
The DC cabinet mini
air conditioner
When working on or with the unit the following must be observed:
•
Applicable current state and local laws and regulations
•
The current accident prevention
• Related regulations
•
The current environmental conservation regulations
The unit must only be used when in perfect working condition. When malfunctions or errors become
apparent the unit must be immediately taken out of operation and
The unit can only be taken back into operation when its perfect working condition has been restored.
Safety instructions
Please note that before starting work on or with the unit certain procedures must be carried out
the cabinet on which the unit is mounted. These are among others mounting and taking the unit in or
out of operation.
.
Before commencing work inside the cabinet the control cabinet manufacturer’s
instruction manual must be read with regard
•Safety instructions
•Instructions on taking the cabinet out of operation
•Instructions on the prevention of unauthorized cabinet reconnection
2.2
General safety instructions
The electric equipment meets the valid VDE
Dangerous voltage exists:
•
Behind the control cabinet doors
•
On the power supply in the unit housing.
Only use original fuses with the specified current. Switch the unit off immediately, if the electric power
supply is interrupted.
Only specialists are allowed to work on the unit. Unauthorized personnel must be prohibited from
Operating personnel must inform their superiors imme
diately if any malfunction on
air conditioner
When working on or with the unit the following must be observed:
Applicable current state and local laws and regulations
The current accident prevention
regulations (BGV)
The current environmental conservation regulations
The unit must only be used when in perfect working condition. When malfunctions or errors become
apparent the unit must be immediately taken out of operation and
the responsible personnel informed.
The unit can only be taken back into operation when its perfect working condition has been restored.
Please note that before starting work on or with the unit certain procedures must be carried out
the cabinet on which the unit is mounted. These are among others mounting and taking the unit in or
Before commencing work inside the cabinet the control cabinet manufacturer’s
instruction manual must be read with regard
to:
•Safety instructions
•Instructions on taking the cabinet out of operation
•Instructions on the prevention of unauthorized cabinet reconnection
General safety instructions
The electric equipment meets the valid VDE
- and accident prevention and
safety regulations.
Behind the control cabinet doors
On the power supply in the unit housing.
Only use original fuses with the specified current. Switch the unit off immediately, if the electric power
EN 9
Only specialists are allowed to work on the unit. Unauthorized personnel must be prohibited from
diately if any malfunction on
The unit must only be used when in perfect working condition. When malfunctions or errors become
the responsible personnel informed.
The unit can only be taken back into operation when its perfect working condition has been restored.
Please note that before starting work on or with the unit certain procedures must be carried out
inside
the cabinet on which the unit is mounted. These are among others mounting and taking the unit in or
Before commencing work inside the cabinet the control cabinet manufacturer’s
•Instructions on the prevention of unauthorized cabinet reconnection
safety regulations.
Only use original fuses with the specified current. Switch the unit off immediately, if the electric power