Manual

EN 17
Take the control cabinet back into operation in the prescribed manner.
Maximum power consumption and current are stated on the data label and in the unit’s instruction
sheet.
When an air-conditioner alarm is given please see section 6 of this manual.
Door contact switch connection
When delivered the door contact terminals are bridged.
If required the unit can be switched on or off via a door contact switch (terminals 1 & 2).
To connect the door contact switch:
 Remove the bridge from terminals 1 and 2.
 Connect the door contact switch to terminals 1 and 2.
 The contact must be closed when the cabinet door is closed.