User manual

Licensing

Connection Service.fm Manual 7

Licensing

1. You need the ThinPrint Engine Premium type license (ThinPrint version 10).

You enter this on the (to be installed) Cortado license server. The license server

can be installed on any computer in the domain, e.g. the print server. This is

not described in depth here, but details can be found in the License server

manual (Page 24

2. For Connection Service, you can also apply in Enterprise Portal

for a for a

THCG-0498-5 type license, free of charge. The figure in the third block (here:

5) shows the number of client devices with client ID (Page 20

). Supply them

with a THCG license on the server that Connection Service is running on. If it's

running on the same server as the license server, give them a Premium license

there as well.

All license keys are valid for 30 days after they have been entered. They must be

activated within this time to continue printing. Demo license keys cannot be activa-

ted. A license key’s expiration date can be found in License Manager under V

ALID

UNTIL (Illus. 12).

Once you have successfully tested ThinPrint, you can purchase a full license. You

will receive new license keys, which are then entered in the License Manager. To acti-

vate the license keys upload them together with their registration keys to the Cortado

Enterprise Portal. For further information about the activation procedure see the

Licensing manual (Page 24

Example configuration

This example of configuration should show how to configure an application server

and a central print server for printing with the Connection Service under Windows.

As example on the client side, a workstation running Windows is described (alterna-

tively, a local print server could be used); information on using other operating sys-

tems and devices is found in the ThinPrint Client Linux or ThinPrint Client Mac user

manual as well as in the documents SEH TPG60/120 as a Client Gateway and SEH

ISD300/400 as a Client Gateway (see Page 24

The components required for this example (Illus. 3) are:

• 1 application server (e.g. a Citrix XenApp server)

• 1 central Windows print server incl. ThinPrint Engine

• 1 Windows server incl. Connection Service

• 1 Cortado License Server (can be installed on any server)

• 1 NAT router

• 1 Windows compatible PC as a local print server – to be configured to support

Connection Service (incl. ThinPrint Client Service Windows)

• 1 client PC (Windows)

• 1 network printer with an internal or external print server

without embedded ThinPrint Client

3 https://enterpriseportal.cortado.com