User manual

Example configuration

16 Manual Connection Service.fm

– Close the configuration panel with OK.

Illus. 14

Illus. 14 Connection Service: configuring the IP address of the central print server

Configuring

a client ID

– Open the command prompt and change to the Connection Service installation

directory.

– Set up the Client ID that you previously set up in ThinPrint Client Manager.

For the example in Illus. 7, enter the following command line:

TPConnect -add 99:111

– Lastly, restart the TP C

ONNECTION SERVICE in the Windows SERVICES folder.

Creating printers on the central print server

You can use Management Center, which is also a part of the ThinPrint Engine Pre-

mium license, for automatic printer creation (Page 24

) It simplifies the creation of

printers and allows the transfer of finishing options to the created printers.

If no Management Center is available create the printers as follows:

1. Create printers with the following syntax, as for example:

HP Color LaserJet 3600#99:1

Lexmark T 644#99:2,

here, “99” represents the client ID (see Illus. 7), and “1” is the printer ID in

ThinPrint Client Manager (see Illus. 5). Note the syntax with hash key (#) and

colon (:).

LIENT

CONNECTIONS

TCP port number for connection to

ThinPrint Clients

4001

Field Explanation Entry/default value