User manual

Example configuration

Connection Service.fm Manual 15

Illus. 12

Illus. 12 License Manager: entering a demo license key for the Connection Service

(example)

–Close License Manager.

– Register the Connection Service from the command prompt in the same direc-

tory with:

TPConnect -install

If successful, you will receive the message shown in Illus. 13. Confirm with OK.

Illus. 13

Illus. 13 Connection Service registered as a Windows service

– So that the Connection Service can communicate with stationary end devices,

create in the Windows registry under:

hkey_local_machine\software\thinprint\tpconnect

the following entry:

– Start the Connection Service configuration in the command prompt from the

installation directory with:

TPConnect -setup

– Make the following settings in G

ATEWAY CONFIGURATION (Illus. 14):

Name Type Setting

Standalone reg_dword 1

Field Explanation Entry/default value

DD IP IP address of the server on which the

ThinPrint Engine is installed (here:

central print server, Illus. 3) – with

clusters the IP addresses of all

nodes; with Management Center,

also with their addresses.

192.168.149.158

(with A

DD button)

TP S

ERVER

CONNECTIONS

TCP port number for connection to

ThinPrint Engines

4000