User manual

Example configuration

14 Manual Connection Service.fm

Illus. 11

Illus. 11 Setting name convention of the Connection Service Port

Windows server with Connection Service

System require-

ments

The following are the operating system requirements:

• Windows Server 2003 or 2003 R2 with Service Pack 2 or higher (only x86),

Windows Server 2008 (only x64) or 2008 R2

Installation Install the Connection Service on a separate Windows server as follows

– Unzip file TP10x64Bundle.zip.

– Under TP10

X64BUNDLE→ CORTADO→ 2-THINPRINT ENGINE 10 PREMIUM SOFT-

WARE→ THINPRINT CONNECTED GATEWAY 6.2.1→ SOFTWARE→ ENGLISH you can

find the files TPConnect.exe and Licman.exe.

– Copy these files into a directory of the server.

– Open the command prompt and change to that directory.

– Start License Manager from the command prompt in the installation directory

with:

Licman

– Enter a license key of the type THCG-xxxx-xxxxxxx-xxxx with L

ICENSE¡ NEW.

– If you need a demo license key, you can find it in the TP10x64Bundle.zip file.

5 Alternative installation: Connection Service on the central print server