User manual

Appendix - Parameter List
TPG User Manual 95
Table 22: Parameter List - ThinPrint Connection Service
Table 23: Parameter List - ThinPrint
® printer
Parameters Value Default Description
conService
[Connection
Service]
on/off off Enables/disables the ThinPrint
Connection Service.
conServer
[Server name]
max. 255 characters
[., a-z, A-Z, 0-9]
[blank] Defines the Connection
Service server via the IP
address or the host name.
(A host name can only be used
if a DNS server was configured
beforehand.)
tpgClientID
[Client ID]
0 - 99999
[max. 5 characters;
0-9]
0 Defines the client ID as stored
in the database of the
Connection Service.
tpgAuthKey
[Authentication
key]
0 - 99999
[max. 5 characters;
0-9]
0 Defines the authentication key
as stored in the database of
the Connection Service.
conPort
[Port]
1 - 65535
[max. 5 characters;
0-9]
4001 Defines the TCP port used by
the TPG for communicating
with the Connection Service.
tpgKeepalive
[Keep alive]
1 - 60000
[max. 5 characters;
0-9]
60 Defines the time interval (in
seconds) after which the
connection to the Connection
Service is refreshed.
Note
: The value has to be
equal to or lower than the
'KeepAliveTO' value set on the
Connection Service server.
tpgRetry
[Connection
retry]
1 - 60000
[max. 5 characters;
0-9]
120 Defines the time interval (in
seconds) after which a
connection retry is executed if
the Connection Service cannot
be reached.
Parameters Value Default Description
prtName_1
~
prtName_6
[Printer]
max. 32 characters
[a-z, A-Z, 0-9, _, -]
[blank] Defines the printer name for
the ThinPrint AutoConnect
feature.