User manual

Appendix - Parameter List
TPG User Manual 88
Table 12: Parameter List - IPv4
Table 13: Parameter List – IPv6
Parameters Value Default Description
ip_dhcp
[DHCP]
on/off on Enables/disables the DHCP
protocol.
ip_bootp
[BOOTP]
on/off on Enables/disables the BOOTP
protocol.
ip_auto
[ARP/PING]
on/off on Enables/disables the IP
address assignment via
ARP/PING.
ip_addr
[IP address]
valid IP address 169.254.
0.0/16
Defines the IP address of the
TPG.
ip_mask
[Subnet mask]
valid IP address 255.255.
0.0
Defines the subnet mask of
the TPG.
ip_gate
[Gateway]
valid IP address 0.0.0.0 Defines the gateway address
of the TPG.
Parameters Value Default Description
ipv6
[IPv6]
on/off on Enables/disables the IPv6
functionality of the TPG.
ipv6_auto
[Automatic
configuration]
on/off on Enables/disables the
automatic assignment of the
IPv6 address for the TPG.
ipv6_addr
[IPv6 address]
n:n:n:n:n:n:n:n : : Defines a manually assigned
IPv6 Unicast address in the
n:n:n:n:n:n:n:n format for the
TPG.
Every 'n' represents the
hexadecimal value of one of
the eight 16 bit elements of the
address. An IPv6 address may
be entered or displayed using
a shortened version when
successive fields contain all
zeros (0). In this case, two
colons (::) are used.