User manual

Maintenance
TPG User Manual 82
Deleting Print Jobs Manually
Proceed as follows:
1. Start the TPG Control Center.
2. Select MAINTENANCE - Job history.
3. Click Delete.
ª All print jobs listed in the job history will be deleted.
Status Status of the print connection. The following statuses are possible:
• 'Initialized' means that there is a connection to the ThinPrint server.
In a next step, the connection to the printer will be established.
• 'Try to connect' means that the connection to the printer will be
established.
• 'Connection rejected' means that the printer rejected the connection.
• 'Pending' means that the print job has been accepted by the TPG
but that the data transfer has not yet started.
• 'Processing' means that the print job has been transferred from the
TPG to the printer.
• 'Processing stopped' means that the data transfer to the printer was
interrupted. This can occur if, for example, the printer ran out of
paper. If the printer error is fixed, data transfer will be resumed.
• 'Completed' means that the TPG has completely forwarded the print
job to the printer.
• 'Aborted' means that the print job has been aborted. This can occur
if, for example, the TPG has been restarted while the print job was
processed.
Protocol Protocol used to transfer the print data. The presentation consists in
a combination of the following values:
• 'ThP' - ThinPrint
• 'Stp' - status or service page
• 'Sock' - RAW/Socket printing
• 'IPP' - IPP printing
• 'LPD' - LPD printing
Name Name of the print job
Sender Name of the sending host:
• '<domain user name>@<domain>' appears with ThinPrint print jobs.
• 'TPG-25' or 'TPG-65' appears when printing a status or service page.
Start Time at which the print job has been sent to the TPG.
Size Size (in Kb) of the print job.
Duration The time needed by the TPG for processing the print job.
Information Description