User manual

Maintenance
TPG User Manual 81
6.7 How to Display the Job History
You can get information about the ThinPrint print jobs that have
been sent to the TPG. Only these print jobs are registered and shown
in the job history.
A time server (Ö36) must be configured on the TPG so that the
date and time can be displayed correctly. If no time server is
configured, the time stamp corresponds to the default time.
A maximum of 32 print jobs are displayed. The first-in, first-out
method is applied from the 33rd print job onwards. The saved print
jobs will be deleted when the TPG is turned off or reset. The print
jobs can also be deleted manually. The print jobs will not be deleted
when the TPG is restarted.
What do you want to
do?
 ’Displaying the job history’ Ö81
 ’Deleting Print Jobs Manually’ Ö82
Displaying the job history
Proceed as follows:
1. Start the TPG Control Center.
2. Select MAINTENANCE - Job history.
ª The Job History is displayed.
The following information is shown in the Job History:
Information Description
ID Identification number of the printer that has spooled the print job.