User manual
Maintenance
TPG User Manual 79
6.6 How to Print a Status or Service Page
You can print status or service pages. Both pages are available in
English.
Status Page
A status page contains basic information of the TPG such as the
model type, hardware address, IP address, subnet mask, gateway, etc.
Service page
A service page contains basic information of the TPG as well as a list
of the current parameter values of the TPG.
Before a status or service page is printed, the printing function must
be enabled and the relevant printer as well as the data format of the
status or service page (ASCII, PostScript, DATAMAX or Citizen-Z) must
be specified. The printer ID 1 and the data format ASCII are preset.
The relevant printer is highlighted in blue in the Device - ThinPrint®
printer menu bar.
What do you want
to do?
’Specifying the Printing Function, Printer and the Data Format
via the TPG Control Center’ Ö
79
’Printing a status page via the TPG Control Center’
Ö
80
’Printing a Status Page via the Status/Reset Button’ Ö80
’Printing a service page via the TPG Control Center’ Ö80
’Printing a Service Page via the Status/Reset Button’ Ö80
Specifying the Printing Function, Printer and the Data Format via
the TPG Control Center
Proceed as follows:
1. Start the TPG Control Center.
2. Select MAINTENANCE – Status page.
3. Select the desired printer ID from the Status Page Printer list.
4. Select the desired data format from the Status page mode list.