User manual
Maintenance
TPG User Manual 72
passwords). The TPG will automatically take over the values
contained in the parameters file on the USB flash drive. This way, the
parameter values can be quickly and easily loaded to other TPG via a
USB flash drive (e.g. when configuring new devices).
Formatting
To use the USB flash drive on the TPG, the USB flash drive must have
the correct file system. You may have to format the USB flash drive,
if necessary.
During the formatting process, all data on the USB flash drive will
be permanently lost.
Whether formatting is required, will be displayed under
'MAINTENANCE - USB device status' in the TPG Control Center.
What do you want to
do?
’Formatting the USB Flash Drive’ Ö72
’Automatic print job buffering’ Ö73
’Saving the Parameter Values Automatically’ Ö73
’Loading the Parameter Values Automatically to a TPG’ Ö73
Formatting the USB Flash Drive
Requirements
; A USB flash drive has been connected to the TPG.
Proceed as follows:
1. Start the TPG Control Center.
2. Select MAINTENANCE – USB device.
3. Click Formatting.
ª The USB flash drive will be formatted.