User manual
Security
TPG User Manual 61
; No certificate request may exist. To delete the certificate
request, see: Ö62.
; No CA certificate may be installed. To delete a CA certificate,
see: Ö62.
Proceed as follows:
1. Start the TPG Control Center.
2. Select SECURITY - Certificates.
3. Click pkcs12 certificate.
4. Click Browse.
5. Specify the pkcs(12) certificate.
6. Enter the password.
7. Click Install.
ª The pkcs(12) certificate will be saved in the TPG.
Saving the S/MIME certificate on the TPG
S/MIME certificates (*.pem file) are used to sign and encrypt the
emails that are sent by the TPG.
If an S/MIME certificate has already been installed on the TPG, it will
be overwritten.
Requirements
; The certificate must be in base 64 format.
Proceed as follows:
1. Start the TPG Control Center.
2. Select SECURITY - Certificates.
3. Click S/MIME certificate.
4. Click Browse.
5. Specify the S/MIME certificate.
6. Click Install.
ª The S/MIME certificate will be saved on the TPG.