User manual
Security
TPG User Manual 59
If a certificate request has already been created on the TPG, it will be
overwritten.
Proceed as follows:
1. Start the TPG Control Center.
2. Select SECURITY - Certificates.
3. Click Certificate request.
4. Enter the required parameters, see: Table 11
Ö
58.
5. Click Create a request.
The creation of the certificate request is in progress. This may
take a few minutes.
6. Select Upload and save the requests in a text file.
7. Click OK.
8. Send the text file as certificate request to a certification
authority.
When the CA certificate has been received, it must be saved in the
TPG; see:
Ö59.
Saving the CA Certificate in the TPG
If a CA certificate has already been installed on the TPG, it will be
overwritten.
Requirements
; A certificate request has been created at an earlier date; see:
Ö58.
; The certificate must be in base 64 format.
Proceed as follows:
1. Start the TPG Control Center.
2. Select SECURITY - Certificates.
3. Click Requested certificate.
4. Click Browse.