User manual

ThinPrint Settings
TPG User Manual 47
4.6 How to get Printer Messages
You can view printer error messages (Paper empty, Offline, Paper
jam, etc.) and printer status messages (idle, printing, warming up,
etc.). In order to get printer messages, you must configure an SNMP
query beforehand.
Not all printers support SNMP. Consult your printer manual for more
information.
What do you want
to do?
 ’Configuring an SNMP Query via the TPG Control Center’ Ö47
 ’Displaying Printer Status Messages via the TPG Control Center’
Ö47
Configuring an SNMP Query via the TPG Control Center
Requirements
; The printer supports SNMP.
Proceed as follows:
1. Start the TPG Control Center.
2. Select DEVICE – ThinPrint® printer.
3. Tick SNMP.
4. Enter the interval (in seconds) into the Monitoring interval box.
5. Click Save & Restart to confirm.
ª The settings are saved.
Displaying Printer Status Messages via the TPG Control Center
Proceed as follows:
1. Start the TPG Control Center.
2. Select DEVICE – ThinPrint® printer.
ª The printer messages are shown under 'ThinPrint® printer status'
in the 'Status' column and are assigned to the printer IDs.