User manual
Network and Device Settings
TPG User Manual 39
5. Specify the sending interval in the Status notification time
area.
6. Click Save & Restart to confirm.
ª The settings are saved.
Configuring event notifications via email
Requirements
; SMTP parameters can be configured on the
TPG, see:
Ö32
.
; A DNS server has been configured on the TPG; see: Ö30.
For the notification service you can specify up to two email
recipients and the message types.
Proceed as follows:
1. Start the TPG Control Center.
2. Select DEVICE - Notification.
3. Enter the email address of the recipient into the Email recipient
box.
4. Tick the options with the desired message types.
5. Click Save & Restart to confirm.
ª The settings are saved.
Configuring event notifications via SNMP traps
For the notification service you can specify up to two SNMP trap
recipients and the message types.
Proceed as follows:
1. Start the TPG Control Center.
2. Select DEVICE - Notification.
3. Enter the trap address of the recipient into the Trap target box.
4. Enter the trap community of the recipient into the Trap
community box.
5. Tick the options with the desired message types.
6. Click Save & Restart to confirm.
ª The settings are saved.