User manual

Network and Device Settings
TPG User Manual 38
3.9 How to Use the Notification Service
You can get notifications in the form of emails or SNMP traps from
the TPG. By means of these notifications up to four email recipients
can be informed about various events irrespective of time and
location.
The following message types are possible:
• The status email periodically informs the recipient about the
status of the TPG.
• The event notification informs you about a specific event on the
TPG via email or SNMP trap. The event can be:
- The restart of the TPG.
- The connection or disconnection of a USB flash drive to/from
the TPG.
- A problem with the TPG.
What do you want
to do?
 ’Configuring the sending of status emails’ Ö38
 ’Configuring event notifications via email’ Ö39
 ’Configuring event notifications via SNMP traps’ Ö39
Configuring the sending of status emails
Requirements
; SMTP parameters can be configured on the TPG, see: Ö 32.
; A DNS server has been configured on the TPG; see: Ö30.
For the notification service you can specify up to two email
recipients.
Proceed as follows:
1. Start the TPG Control Center.
2. Select DEVICE - Notification.
3. Enter the email address of the recipient into the Email recipient
box.
4. Tick Status for the relevant recipient.