User manual

Network and Device Settings
TPG User Manual 36
Table 8: Bonjour Parameters
3.7 How to Configure the Device Time
You can set the time of the TPG via a time server (SNTP server) in the
network. A timeserver is a computer networking device that reads
the actual time from a reference clock and distributes this
information to its clients. In the TPG, the time server is defined via
the IP address or the host name.
Benefits and
Purpose
If the time server is activated, all ThinPrint print jobs that are
handled by the TPG will get a time stamp. Date and time are then
displayed under (Ö81) 'Job History'.
UTC
The TPG uses 'UTC' (Universal Time Coordinated) as a basis. UTC is a
reference time and used as a time standard.
Time zone
The time received by the time server does not necessarily correspond
to your local time zone. Deviations from your location and the
resulting time difference (including country-specific particularities
such as Daylight Saving Time) can be handled by means of the 'Time
zone' parameter.
Requirements
; A time server is integrated into the network.
Proceed as follows:
1. Start the TPG Control Center.
2. Select NETWORK - Date/Time.
3. Tick Date/Time.
Parameters Description
Bonjour Enables/disables Bonjour.
Bonjour name Defines the Bonjour name of the TPG.
The TPG uses this name for its Bonjour services. If no
Bonjour name is entered, the default name will be used
(device name@ICxxxxxx).