User manual

Appendix - Parameter List
TPG User Manual 101
Table 28: Parameter List - USB device
Table 29: Parameter List – Status page
auth_wpa_addon
[WPA add-on]
max. 255 characters
[a-z, A-Z, 0-9]
[blank] Specifies an optional WPA
expansion.
Parameters Value Default Description
tpgBuffer
[Print job
buffering]
on/off off Enables/disables the
automatic buffering of print
jobs if a printer cannot be
reached.
autoSync
[Parameter
backup]
on/off on Enables/disables the
automatic parameter backup
to a connected USB flash
drive.
Parameters Value Default Description
spage
[Status page]
on/off on Enables/disables the printing
of status and service pages on
the relevant printer.
The print job can be triggered
by pressing the status/reset
button on the device or by
clicking the corresponding
button in the TPG Control
Center.
spPrinter
[Status page
printer]
TPG-25 = 1-2
TPG-65 = 1-6
1 Defines the printer on which
status pages and services
pages are printed, via the
printer ID.
spMode
[Status page
mode]
ASCII
PostScript
DATAMAX
Citizen-Z
ASCII Defines the data format in
which the status page is
printed.
Parameters Value Default Description