Installation guide

Quick Installation Guide [en] 11
 First Steps with the InterCon-NetTool
Starting the InterCon-NetTool
Start the InterCon-NetTool on your client via the Windows start menu.
(Start --> All Programs --> SEH Computertechnik GmbH --> InterCon-NetTool)
After the InterCon-NetTool was started, it searches the network for existing
devices and displays them in the 'device list'.
During the initial configuration, the client and the TPG-25 must be assigned to
the same local network segment.
Detailed information on how to use the InterCon-NetTool can be found
in the Online Help. To start the Online Help, select Help – Online Help
from the menu bar.
