Installation guide

10 [en] Quick Installation Guide
 Software Installation
The 'InterCon-NetTool' has been developed by SEH Computertechnik GmbH for
the administration of SEH network devices. By means of this tool you can assign
a suitable IP address to the TPG-25, as described below.
In order to use the InterCon-NetTool, the program must be installed on a
computer. Different installation files are available, depending on the operating
system.
First, you have to download the installation file for the InterCon-NetTool from
the homepage of the SEH Computertechnik GmbH:
http://www.seh-technology.com/products/thinprint-gateways/products/
tpg-25-downloads.html
Scan this QR code using your smart phone to get direct access to the homepage.
Proceed as follows:
1. Start the InterCon-NetTool installation file.
2. Select the desired language.
3. Follow the installation routine.
 The InterCon-NetTool will be installed on your client.