Installation guide

Hardware Installation Guide 15
 Mounting the Print Server
The print server can be used for printers with parallel or USB interface. You can
connect up to two printers. It is also possible to connect a hub to the USB
interface of the print server and use it with up to four additional printers.
A status page can only be printed if the printer supports ASCII, PostScript,
DATAMAX (label printer), or the Citizen-Z (label printer) format.
Proceed as follows:
1. Turn the printer off.
2. Connect the printer’s data cable (Parallel or USB) to the print
server.
3. Connect the power cord to the print server.
4. Turn the printer on.
5. Press the status button of the print server in order to print out
a status page.