Installation manual

LPD Printing (Windows NT 3.51)
Print Server Installation Manual 45
Fig. 32: Add LPR Compatible Printer
7. Enter the IP address or host name of the print server in the
Name or address of host providing lpd box.
8. Enter the name of the logical printer (lp1 - lp8) in the Name of
printer or print queue on that server box.
With print server models with several physical ports, the logical printer is also
used to address the port. If no name or an incorrect name has been entered, the
print data is automatically routed to the printer through logical printer no.1. For
more information, please read the section ’Logical Printers’ in the user manual.
9. Click OK to confirm.
ª The printer is set up and the LPR port is configured.
Troubleshooting
Depending on the printer type, external print server models that are
connected to the printer's Centronics interface may have printing
problems. In this case, disable the 'bidirectionality' of the Windows
driver under 'Properties'. This applies to the MINOLTA QMS PagePro
1200W printer, for example.