Installation manual

LPD Printing (Windows NT 3.51)
Print Server Installation Manual 44
6.3 Setting up the Printer and Configuring the LPR
Port
You must set up your printer as a local printer under Windows NT
3.51. Select the LPR port as the printer port. The different logical
printers (lp1 - lp8) can be addressed by means of the LPR port.
If you have already set up your printer, you must only configure the
LPR port. Call the property sheet of the printer. Continue with step 4
described in the following.
Proceed as follows:
1. Select Print Manager from the main menu.
2. Select Setup New Printer from the Printer menu.
The Setup New Printer window appears.
3. Enter a printer name, a driver, and a description.
4. Select Other... in the Print to box.
The following dialog appears:
Fig. 31: Print Destinations
5. Select LPR Port.
6. Click OK to confirm.
The following dialog appears: