Installation manual

LPD Printing (Windows NT 3.51)
Print Server Installation Manual 41
Procedure
Follow the instructions to carry out the installation:
 ’Installing the TCP/IP and FTP Services’ Ö41
 ’Saving the IP Address in the Print Server’ Ö43
 ’Setting up the Printer and Configuring the LPR Port’ Ö44
6.1 Installing the TCP/IP and FTP Services
In order to use your print server in a Windows NT 3.51 system, you
must first install the TCP/IP and FTP services in the NT server.
If the TCP/IP and FTP services have already been installed, you may
skip to the section ’Saving the IP Address in the Print Server’ Ö43.
Proceed as follows:
1. Select Control Panel from the main menu.
2. Double-click Network.
The following dialog appears:
Fig. 27: Network Settings
3. Click Software.
The following dialog appears: