Installation manual

LPD Printing (Windows NT 4.0)
Print Server Installation Manual 37
7. Follow the instructions of the installation routine.
The Services tab appears after the installation routine has been
completed.
8. Click Close.
ª The Microsoft TCP/IP print services are installed.
5.4 Setting Up the Printer and Configuring the LPR
Port
In Windows NT 4.0, you must set up your printer as a printer
managed by your computer under and not as a network printer
server. Select the LPR port as the printer port. The different logical
printers (lp1 - lp8) can be addressed by means of the LPR port.
If you have already set up your printer, you must only configure the
LPR port. Call the property sheet of the printer and select the 'Ports'
tab. Continue with step 4 described in the following.
Proceed as follows:
1. Select Printers from the 'Start' menu.
2. Double-click Add Printer.
The following dialog appears:
Fig. 22: Add Printer Wizard