Installation manual
LPD Printing (Windows NT 4.0)
Print Server Installation Manual 35
9. Enter the IP address of the client in the IP Address box.
10. Enter the subnet mask into the Subnet Mask box, if required.
11. Enter the IP address of the gateway into the Default Gateway
box, if required.
12. Click OK to confirm.
ª The TCP/IP protocol is installed.
5.2 Saving the IP Address in the Print Server
The print server must be known to the network via its IP address.
We recommend using the IP wizard of the InterCon-NetTool in order
to assign an IP address to the print server, see: Ö12.
5.3 Installing the Microsoft TCP/IP Print Services
In order to print via TCP/IP, you must install the Microsoft TCP/IP
print services.
If the Microsoft TCP/IP print services have already been installed,
you may skip to the section ’Setting Up the Printer and Configuring
the LPR Port’ Ö37.
Proceed as follows:
1. Select Control Panel from the 'Start' menu.
2. Double-click Network.
3. Select the Services tab.
The following dialog appears: