Installation manual

LPD Printing (Windows NT 4.0)
Print Server Installation Manual 33
Procedure
Follow the instructions to carry out the installation:
 ’Installing the TCP/IP Protocol’ Ö33
 ’Saving the IP Address in the Print Server’ Ö35
 ’Installing the Microsoft TCP/IP Print Services’ Ö35
 ’Setting Up the Printer and Configuring the LPR Port’ Ö37
5.1 Installing the TCP/IP Protocol
In order to use your print server in a Windows NT 4.0 system, you
must first install the TCP/IP protocol in the NT server.
If the TCP/IP protocol has already been installed, you may skip to the
section ’Saving the IP Address in the Print Server’ Ö35.
Proceed as follows:
1. Select Control Panel from the 'Start' menu.
2. Double-click Network.
3. Select the Protocols tab. The following dialog appears:
Fig. 17: Network - Protocols