Installation manual

Socket Printing (Windows Me/98/95)
Print Server Installation Manual 29
4. Select a logical printer (lp1 - lp8) from the list.
Please note that the printer port of print server models with several physical
printer ports (COM1, USB1, etc.) is defined via the logical printer.
5. Select Encrypted printing if you wish to encrypt the print data.
Refer to the print server documentation for more information.
6. Select Authentication, if necessary. Refer to the print server
documentation for more information.
Fig. 14: SEH Print Monitor - SNMP
7. Tick SNMP monitoring in order to enable the reception of
printer status messages.
8. Enter the following into the 'Community' box:
- If there is a write protection on the print server, you must enter the password.
If there is no write protection on the print server, you must enter ’public’.
- If there is a read protection on the print server, the 'Community' box does not
appear. When starting the SEH Print Monitor you will be asked to enter a
password. The password will be used as Community name within the SNMP
communication.
9. Click Next. The following dialog appears: