Installation manual

Socket Printing (Windows Me/98/95)
Print Server Installation Manual 27
4. Select a port number from the list and confirm by clicking Next.
The following dialog appears:
Different logical printers are addressed via the port number (9100 - 9107). Please
note that the printer port of print server models with several physical printer
ports (COM1, USB1, etc.) is defined via the logical printer.
Fig. 11: SEH Print Monitor - SNMP
5. Tick SNMP monitoring in order to enable the reception of
printer status messages.
6. Enter the following into the Community box:
- If there is a write protection on the print server, you must enter the password.
If there is no write protection on the print server, you must enter ’public’.
- If there is a read protection on the print server, the 'Community' box does not
appear. When starting the SEH Print Monitor you will be asked to enter a
password. The password will be used as Community name within the SNMP
communication.
7. Click Next. The dialog thats appears contains all entries.
8. Check your entries and click Finish.
ª The configuration is saved and the TCP/IP printer port is added
to the client.