Installation manual

Socket Printing (Windows Me/98/95)
Print Server Installation Manual 20
4.1 Installing the TCP/IP Protocol
In order to use your print server in Windows Me, 98 or 95, you must
first install the TCP/IP protocol on the computer intended for
printing.
If TCP/IP has already been installed, you may skip to the section
’Saving the IP Address in the Print Server’ Ö22.
Proceed as follows:
1. Select Control Panel from the 'Start' menu.
2. Double-click Network.
3. Select the Configuration tab.
The following dialog appears:
Fig. 5: Network - Configuration
4. Click Add.
5. Select Protocols.
6. Click Add.
The following dialog appears: