Installation manual
Peer-to-Peer Printing via NetBIOS
Print Server Installation Manual 14
• If TCP/IP has already been installed on your system, you may skip
to the section ’Saving the IP Address in the Print Server’ Ö14.
2.2 Saving the IP Address in the Print Server
The print server must be known to the network via its IP address.
We recommend using the IP wizard of the InterCon-NetTool in order
to assign an IP address to the print server, see: Ö12.
2.3 Configuring NetBIOS Parameters
The NetBIOS parameters for the print server must be configured so
that the print server can be seen in the network environment. For
this purpose, various administration methods are available.
The print server can only be configured in an existing workgroup or
domain. If necessary, configure new workgroups or domains in
advance.
Proceed as follows:
1. Start the Print Server Homepage or start the InterCon-NetTool
and double-click the print server in the print server list.
2. Select Configuration – Microsoft Windows.
3. Tick NetBIOS.
4. Enter an existing workgroup or domain into the NetBIOS name
box.
5. Click Save or OK to confirm.
ª The settings are saved.