User manual

Maintenance
mySND User Manual 96
8.3 How to Perform an Update
You can carry out software and firmware updates on the SND
Server. Updates allow you to benefit from currently developed
features.
What Happens
during an Update?
In the course of an update, the existing firmware/software will be
overwritten and replaced by a new version. The parameter default
settings of the device remain unchanged.
When Is an Update
Recommended?
An update should be undertaken if functions do not work properly
and if SEH Computertechnik GmbH has released a new software or
firmware version with new functions or bug fixes.
Check the installed software and firmware version on the SND
Server You will find the version number on the mySND Control
Center homepage or in the product list in the InterCon-NetTool.
Where Do I Find the
Update Files?
Current firmware and software files can be downloaded from the
homepage of SEH Computertechnik GmbH:
http://www.seh-technology.com/services/downloads/mySND.html
Every update file has its own 'readme' file. Take note of the
information contained in the 'readme' file.
Proceed as follows:
1. Start the mySND Control Center.
2. Select MAINTENANCE - Update.
3. Click Browse.
4. Select the update file.
5. Click Install.
ª The update is executed. The SND Server is restarting.