User manual

Maintenance
mySND User Manual 93
8.2 How to Reset the SND Parameters to their
Default Values
It is possible to reset the parameters of the SND Server to the
default values (factory settings). All previously configured parameter
values will be deleted in this process. Installed certificates will not be
deleted.
Resetting the SND Server may result in a change in the IP address
and a loss of the connection to the mySND File Browser and the
mySND Control Center.
When is Resetting
Recommended?
You must reset the parameters, for example, if you have changed the
location of the SND Server and if you want to use it in a different
network. Before this change of location, you should reset the
parameters to the default settings to install the SND Server in
another network.
What do you want
to do?
 ’Resetting the Parameters via the mySND Control Center’ Ö93
 ’Resetting Parameters via the InterCon-NetTool’ Ö94
 ’Resetting the Parameters via the Reset Button’ Ö94
By means of the reset button of the device you can reset the
parameters without entering the password.
Resetting the Parameters via the mySND Control Center
Proceed as follows:
1. Start the mySND Control Center.
2. Select MAINTENANCE - Default settings.
3. Click Reset device to default settings.
4. Confirm the security query by clicking Reset.
ª The parameters are reset.