User manual

Security
mySND User Manual 80
Creating a Certificate Request for CA Certificates
As a preparation for the use of a CA certificate, a certificate request
that has to be sent to the certification authority can be created in
the SND Server. The certification authority will then create a CA
certificate on the basis of the certificate request. The certificate
must be in base64 format.
If a certificate request has already been created on the SND Server,
you must first delete the certificate request; see: Ö83.
Proceed as follows:
1. Start the mySND Control Center.
2. Select SECURITY - Certificates.
3. Click Certificate request.
4. Enter the required parameters, see: Table 11 Ö79.
5. Click Create a request .
The creation of the certificate request is in progress. This may
take a few minutes.
6. Click Save and save the request in a text file.
7. Click OK.
8. Send the text file as certificate request to a certification
authority.
When the CA certificate has been received, it must be saved in the
SND Server; see: Ö80.
Saving the CA Certificate in the SND Server
If a CA certificate has already been installed on the SND Server, it
will be overwritten.
Requirements
; A certificate request has been created at an earlier date; see:
Ö80.
; The certificate must be in base64 format.