User manual
Security
mySND User Manual 75
The 'test mode' option is activated by default. After a successful
test, you must deactivate the test mode so that access protection
remains permanently active.
Proceed as follows:
1. Start the mySND Control Center.
2. Select SECURITY - TCP port access.
3. Tick Port access control.
4. Select the desired protection in the
Security level
area.
5. In the Exceptions area, define the network elements which are
excluded from port blocking. Enter the IP or MAC addresses and
tick the options.
6. Make sure that the test mode is enabled.
7. Click Save & Restart to confirm.
The settings are saved.
The port access control is activated until the device is restarted.
8. Check the port access and configurability of the SND Server.
If the SND Server can no longer be reached using the mySND
Control Center, restart the device; see: Ö97.
9. Clear Test mode.
10. Click Save & Restart to confirm.
ª The settings will be saved. The port access control is active.
Access to the ports is restricted.