User manual

Working with the mySND File Browser
mySND User Manual 58
Start and Login
The login to the SND server is session-based. Up to 16 users can be
logged on to the SND server at the same time. For further
information; see:
Ö72.
Requirements
; The SND Server is connected to the network and the mains
voltage.
; The SND Server has a valid IP address.
The user account 'Admin' and the password 'admin' have been
configured by default. Change the password when you use the SND
server in a real situation; see: Ö42.
Proceed as follows:
1. Open your browser.
2. Enter the IP address of the SND Server as the URL.
The login page appears.
If the login page is not displayed, check the proxy settings of the browser.
3. Enter the user name and password of a user account.
4. Click Login.
ª The mySND File Browser will be displayed in the browser.
You can also start the mySND File Browser via the software tool
'InterCon-NetTool'.
Proceed as follows:
1. Highlight the SND Server in the device list.
2. Select Actions – Launch Browser from the menu bar.
The login page appears.
3. Enter the user name and password of a user account.
4. Click Login.
ª The mySND File Browser will be displayed.