User manual

Media Management and Access Settings
mySND User Manual 55
Editing File Transfers
You can modify the settings of an existing file transfer.
Proceed as follows:
1. Start the mySND Control Center.
2. Click FILE BROWSER - File transfer.
3. Click the icon in the File transfer status table for the file
transfer to be edited.
4. Select the SD card from the list. (ony for SD cards)
5. Enter the email address of the addressee into the Recipient box.
6. In the Source folder box, enter the path to the source directory
on the removable medium.
7. In the Accessible file types box, define the file types to be
transferred by their file extension.
- Schema: .<Extension>
- File types without extension will be defined by a dot.
- Multiple entries are to be separated by blanks.
8. Tick/clear Set archive bit. (Optional)
9. Click Save to confirm.
ª The settings will be saved.
Enabling/Disabling File Transfers
Proceed as follows:
1. Start the mySND Control Center.
2. Click FILE BROWSER - File transfer.
3. Click the icon in the File transfer status table for the file
transfer to be disabled.
4. Clear Enable.
5. Click Save to confirm.
ª The settings will be saved.