User manual

Media Management and Access Settings
mySND User Manual 51
What do you want
to do?
 ’Adding a File Filter’ Ö51
 ’Editing File Filters’ Ö51
 ’Deleting the File Filter’ Ö52
Adding a File Filter
Proceed as follows:
1. Start the mySND Control Center.
2. Click FILE BROWSER - File filter.
3. Enter a freely definable name into the Filter name box.
4. In the Accessible file types box, define the file types that will be
displayed in the mySND File Browser. Enter the file extension:
- Schema: .<Extension>
- File types without extension will be defined by a dot.
- Multiple entries are to be separated by blanks.
5. Click Save to confirm.
ª The settings will be saved.
Editing File Filters
You can modify the settings of an existing file filter.
Proceed as follows:
1. Start the mySND Control Center.
2. Click FILE BROWSER - File filter.
3. Click the icon in the File filter status table for the file filter
to be modified.
4. Enter a freely definable name into the Filter name box.
5. In the Accessible file types box, define the file types that will be
displayed in the mySND File Browser. Enter the file extension:
- Schema: .<Extension>
- File types without extension will be defined by a dot.
- Multiple entries are to be separated by blanks.
6. Click Save to confirm.
ª The settings will be saved.