User manual

Device Settings
mySND User Manual 41
5. Specify the sending interval in the Status notification time
area.
6. Click Save & Restart to confirm.
ª The settings will be saved.
Configuring event notifications via email
Requirements
; SMTP parameters have been configured on the SND Server, see:
Ö32.
; A DNS server has been configured on the SND Server; see: Ö 30.
For the notification service you can specify up to two email
recipients and the message types.
Proceed as follows:
1. Start the mySND Control Center.
2. Select DEVICE - Notification.
3. Enter the recipient into the Email address box.
4. Tick the options with the desired message types.
5. Click Save & Restart to confirm.
ª The settings will be saved.
Configuring event notifications via SNMP traps
For the notification service you can specify up to two SNMP trap
recipients and the message types.
Proceed as follows:
1. Start the mySND Control Center.
2. Select DEVICE - Notification.
3. In the SNMP traps area, specify the recipients via the IP address
and the community.
4. Tick the options with the desired message types in the
Notifications area.
5. Click Save & Restart to confirm.
ª The settings will be saved.