User manual

Device Settings
mySND User Manual 40
4.3 How to Use the Notification Service
You can get notifications in the form of emails or SNMP traps from
the SND Server. By means of these notifications up to four
recipients can be informed about various events irrespective of time
and location.
The following message types are possible:
• The status email periodically informs the recipient about the
status of the SND Server and the connected removable media.
• The event notification informs you about a specific event on the
SND Server via email or SNMP trap. The event can be:
- The connection or disconnection of removable media to/from
the SND Server.
- The restart of the SND Server.
What do you want
to do?
 ’Configuring the sending of status emails’ Ö40
 ’Configuring event notifications via email’ Ö41
 ’Configuring event notifications via SNMP traps’ Ö41
Configuring the sending of status emails
Requirements
; SMTP parameters have been configured on the SND Server, see:
Ö32.
; A DNS server has been configured on the SND Server; see:
Ö30.
For the notification service you can specify up to two email
recipients.
Proceed as follows:
1. Start the mySND Control Center.
2. Select DEVICE - Notification.
3. Enter the recipient into the Email address box.
4. Tick Status email.