User manual

Network Settings
mySND User Manual 35
Table 7: SMTP Parameters
Parameters Description
SMTP - Server name Defines the SMTP server via the IP address or the host
name.
The host name can only be used if a DNS server was
configured beforehand.
SMTP - Server port Defines the port number used by the SND Server to send
emails to the SMTP server. The port number 25 is
preset.
SMTP - TLS Enables/disables TLS.
The security protocol TLS (Transport Layer Security) is
used to encrypt the transmission between the SND
Server and the SMTP server. The cipher strength is
defined via the encryption level
Ö69.
SMTP - Sender name Defines the email address used by the SND Server to
send emails.
Note:
Very often the name of the sender and the user
name are identical.
SMTP - Login Enables/disables the SMTP authentication for the login.
SMTP - User name Defines the user name used by the SND Server to log on
to the SMTP server.
SMTP - Password Defines the password used by the SND Server to log on
to the SMTP server.
SMTP - Security (S/MIME) Enables/disables the encryption and signing of emails
via S/MIME.
Note:
Only emails from the administration and the
notification service can be encrypted and signed.
SMTP - Signing emails Defines the signing of emails.
A signature created by the sender allows the recipient to
verify the identity of the sender and to make sure that the
email was not modified. An S/MIME certificate is required
for the signing of emails
Ö76.
SMTP - Full encryption Defines the encryption of emails.
Only the recipient can open and read the encrypted
email. An S/MIME certificate is required for the
encryption
Ö76.
SMTP- Attach public key Sends the public key together with the email. Many email
clients require the public key to be attached in order to
view the emails.