User manual

Network Settings
mySND User Manual 32
2. Select NETWORK - SNMP.
3. Configure the SNMP parameters; see: Table 5 Ö32.
4. Click Save & Restart to confirm.
ª The settings will be saved.
Table 5: SNMP Parameters
3.5 How to Configure POP3 and SMTP
You must configure the protocols POP3 and SMTP and email limits
on the SND Server so that the notification service (Ö40), the
administration via email (Ö22), the automatic file transfer
(Ö53) and the sending of files in the mySND File Browser (Ö64)
will work properly.
POP3
'POP3' (Post Office Protocol Version 3) is a transfer protocol that a
client can use to fetch emails from a mail server. POP3 is required in
the SND Server to administer the SND Server via email.
SMTP
'SMTP' (Simple Mail Transfer Protocol) is a protocol that controls the
sending of emails in networks. SMTP is required in the SND Server to
Parameters Description
SNMPv1 Enables/disables SNMPv1.
Read-only Enables/disables the write protection for the community.
Community SNMP community name
The SNMP community is a basic form of access
protection in which several participants with the same
access rights are grouped together.
SNMPv3 Enables/disables SNMPv3.
User name Defines the name of the SNMP user.
Password Defines the password of the SNMP user.
Hash Defines the hash algorithm.
Access rights Defines the access rights of the SNMP user.
Encryption Defines the encryption method.