User manual

Network Settings
mySND User Manual 25
3 Network Settings
What information do
you need?
• ’How to Configure IPv4 Parameters’ Ö25
• ’How to Configure IPv6 Parameters’
Ö28
• ’How to Configure the DNS’ Ö30
• ’How to Configure SNMP’
Ö31
• ’How to Configure POP3 and SMTP’
Ö32
• ’How to Configure Bonjour’ Ö36
3.1 How to Configure IPv4 Parameters
TCP/IP (Transmission Control Protocol over Internet Protocol)
forwards data packets across several connections and establishes a
connection between the network participants.
The boot protocols DHCP and BOOTP belong to the TCP/IP protocol
family. You can define various IPv4 parameters for an ideal
integration of your SND Server into a TCP/IP network. For further
information about the assignment of IP addresses, see: Ö12.
What do you want
to do?
 ’Configuring IPv4 Parameters via the mySND Control Center’
Ö25
 ’Configuring IPv4 Parameters via the InterCon-NetTool’ Ö26
Configuring IPv4 Parameters via the mySND Control Center
Proceed as follows:
1. Start the mySND Control Center.

You can define various settings for an ideal integration
of the SND Server into a TCP/IP network. This chapter
explains which network settings are supported by the
SND Server.